À propos de KomShine

KomShine est une fabrication professionnelle d'équipements de fibre optique tels que les soudeause, OTDR, Photométrie, identificateurs de fibre, nettoyeurs et inspecteurs de fibre optique, kits d'outils de fibre optique.

détails du contact

Test et mesures

QX55 Fiber Master OTDR

Test du réseau longue distance
Tester le réseau d'accès
Test FTTx/PON via des séparateurs
Compact, robuste, léger 0,7 kg
Toute nouvelle conception d'interface utilisateur avec innovation
Plage dynamique 32dB
Zone morte d'événement de 1 m
Modules intégrés OPM, SLS, VFL, RJ45, FIP
Fonctions de carte de liaison et de jugement réussite/échec
Test à double longueur d'onde

INFORMATION SUR LE PRODUIT

OTDR Specifications
Model QX55-S QX55-P
Wavelength (nm) SM 1310/1550 PON 1310/1550/1625 (built-in filter)
Dynamic range (dB) 32/30 32/30/28
Number of optical port 1 2
Applicable fiber SM (ITU-T G.652)
Distance range (km) 0.5,1,2,5,10,20,35,50,75,100,150,200
Pulse width (ns) 5,10,20,50,100,200,500,1000,2000,10000,20000
Event dead zone*1 (m) 1
Attenuation dead zone*2 (m) 3.5
Number of sampling points Max.80000
Sampling resolution Min.0.04m
Distance measurement accuracy ±(0.75 m + Measurement distance × 2 × 10−5 + Sampling resolution)
Loss measurement accuracy ±0.03 dB/dB
Return loss measurement accuracy ±2 dB
Optical Power Meter Module (Built-in) ×
OPM Wavelength (nm) 800 ~ 1650nm
Power range -70 ~ +6dBm
Measure accuracy <(±0.2dB or ±5%)
Display resolution 0.01dB
Optical input port SC/UPC + 2.5mm Universal ferrule
Stabilized Light Source Module (Built-in)
SLS Wavelength (nm) 1310/1550
Output power ≥-10dBm
Modulation mode CW, 270 Hz, 1 kHz, 2 kHz
Laser class Class 1M or Class 1
Optical input port OTDR port
Visual Fault Locator Module (Built-in)
VFL Wavelength (nm) 650
Output power 10mW
Modulation mode CW, CHOP (2 Hz)
Laser class Class 3R
Optical input port 2.5 mm Universal ferrule type
Fiber Inspection Probe (Built-in) Optional Optional
FIP Magnification 250X
Resolution(um) ≥1.0
Electrical interface USB2.0
Optical Connector FC/UPC,SC/UPC,ST/UPC
Sensor 1/3 inch
 
RJ45 Wavelength (nm) CAT5, CAT6
Distance of Cable Collationl 300m
Distance of emitting signal 300m
 
General Specifications
Link Map
Pass/Fail judgment
Distance unit m, km, mile, ft, kft
PC Analysis Software
Languages English, Español, Chinese, Português, Français, Русский
Optical connector SC/UPC (FC/UPC,ST/UPC,LC/UP is Optional)
Display 3.5-inch color TFT LCD (Resolution: 640 × 480)
Electrical interface Charge port × 1, USB 2.0 × 3, RJ45 × 2
Operating temperature -10 ~ 50℃ (0 ~ 40℃ when AC adapter is being used. 0 to 35℃ when battery is be charged)
Storage temperature -20 to 60℃
Altitude 4000 m
Humidity 0 to 90% RH (20 to 90% with 739874 AC adapter, non-condensing)
Power requirements 100 - 240V AC, 50/60Hz (AC adapter)
Battery 3000mAh
LED Light illumination ≥15000mcd
Operating time*3 5 hours
Data storage Internal storage: ≥1000 waveforms, External storage: USB memory
Dimensions 118 mm (W) × 218 mm (H) × 55 mm (D)
Weight Approx. 0.73 kg (including internal battery and protectors, excluding OTDR unit and options)
Notes:
1. Minimum pulse width, return loss: ≥55 dB (≥40 dB for 850/1300 nm), group refractive index: 1.5, at 1.5 dB below the unsaturated peak level.
2. Minimum pulse width, group refractive index: 1.5, at a point where the backscatter level is within ±0.5dB of the normal level. For SMF, at 1310nm, return loss: ≥55dB.
3. New Battery All specifications valid at 23°C ± 2°C (73.4°F ± 3.6°F) unless otherwise specified.